How Long Does the Ninja Coffee Bar Take to Clean?

Plan on investing in a new Ninja Coffee Bar for your home or office? Also, how long does the Ninja Coffee Bar take to clean? Here is a look at how you can keep one of those units clean and sanitary.

How Long Does The Ninja Coffee Bar Take To Clean
The average time need to clean your coffee maker per month is 60 to 70 mins

While a Ninja Coffee Bar can completely change the way that you enjoy this delicious beverage, many owners feel a bit intimidated when it comes time to clean those machines. Luckily, with a little hard work and a few inexpensive products, you can make sure that your Ninja Coffee Bar remains clean and well-maintained for many years to come.

So you have been wondering how long it is going to take to clean your Ninja Coffee Bar? While this process will be slightly different for everyone, you should expect to spend around 60 or 70 minutes per month cleaning your coffee maker if you are using it every day or multiple times a day.

This process is relatively straightforward, but there are a few important steps that you don’t want to miss. Properly caring for your new coffee maker is going to extend its lifespan and help you avoid unnecessary breakdowns. It is also going to improve the quality and flavor of your coffee.

Cleaning The Coffee Maker Inside And Out

Cleaning your Ninja Coffee Bar can be broken down into two separate steps, and how long it takes you to carry out those steps will be determined by a few different factors. If you are using your coffee maker every single day and your home has hard water, then it might take you as long as an hour and a half to clean it.

Luckily, the Ninja Coffee Bar (learn more) has an incredibly helpful cleaning button that lights up when it detects too much debris inside the system. That being said, you should still clean the entire unit at least once every few weeks even if the button doesn’t light up. That button only notifies you of debris on the inside of the percolation lines and filter.

We earn a commission if you make a purchase, at no additional cost to you.

Getting Rid Of Exterior Residue

Cleaning the outside of the Ninja Coffee Bar is a relatively simple process that should only take a few minutes as long as there isn’t any hardened debris. All you are going to need to clean the outside of the unit is some warm water, a little bit of dish soap, and a clean sponge. You can start by wiping down all of the primary components with the sponge and a little bit of soapy water.

After you have removed most of the visible debris from the brew basket and measuring spoon, you can then clean off the temp warming plate. When you are cleaning that part of the coffee maker, you must be very careful that you don’t press down too hard. While the temp warming plate should be relatively durable, it could still be chipped or cracked if you apply too much pressure.

Once you have thoroughly cleaned off all of the bigger surfaces with your soapy water and sponge, you can then wipe down the plastic, glass, and metal with a clean sponge. Most mild dish soaps probably won’t leave behind too much residue, but you could still deal with some cosmetic blemishes if the unit isn’t wiped down with a clean sponge.

Using The Cleaning Feature

vinegar, cleaning, cleaner
Use a regular white vinegar to clean the inside of your Ninja Coffee Bar

Cleaning the inside of the coffee maker is going to be a little more time-consuming, but the Ninja Coffee Bar should do most of the work. The most effective way to clean the inside of the Coffee Bar is with regular white vinegar. After you have gotten rid of most of the coffee grounds with a few rinse cycles, you can then fill up the reservoir with white vinegar and warm water.

As a general rule, you should never put more than 15 or 16 ounces of white vinegar in your coffee maker at once. A little bit of white vinegar can be very effective, but using too much could alter the taste of your coffee for days. When the reservoir has been filled with the mixture, all you have to do is hit the “Full Carafe” setting and the “Clean” button.

To cleaning cycle can take up to one hour to complete, but the results are going to be worth it.

The final step in the internal cleaning cycle is rinsing out all of the droplets of vinegar so that it doesn’t impact the taste of your coffee. Once the vinegar has been cycled through the machine, the “Flush” button should illuminate. That button means that it is time to rinse the carafe and refill the reservoir.

The flush cycle will take anywhere from five to eight minutes depending on the age of the unit.

Taking Care Of The Milk Frother

Milk frothing for coffee.
Milk frother attachment can be clean within 20-30 seconds in a cup of hot water

If you plan on using the milk frother attachment on your Ninja Coffee Bar, then you must regularly clean that as well. Luckily, all you have to do to clean that attachment is to submerge it in a cup of hot water and then turn it on for 20 or 30 seconds. After about 30 seconds, the frother should have no more milk residue on it.

For a particularly dirty milk frother, you might want to add some type of natural cleaner to your hot water. Putting a few drops of lemon in the hot water could break apart any debris that is clinging to the metal fixture. The manufacturer claims that a few drops of lemon juice in warm water can be used as an alternative to the vinegar solution as well.

To clean the inside of the unit without using vinegar, you can fill the carafe with warm water and then squeeze in a few teaspoons of fresh lemon juice. While that mixture won’t be quite as effective as white vinegar, it could be a better option if you have a sensitive nose or palate.

One additional step that you might want to carry out if your home has hard water is wiping down all of the surfaces with a soft rag after every use. Hard water won’t necessarily damage the outside of the unit, but it could look unsightly. You should also use bottled or filtered water whenever you use the Ninja Coffee Bar to prevent sediment from building up.

Other Helpful Tips:

  • Always clean and sanitize your coffee maker if it isn’t going to be used for a long period of time.
  • Carefully read the instructions and safety warnings before you try any of the cleanings or rinsing features.
  • Use filtered or bottled water whenever you are making coffee or cleaning the unit.

Keeping Your Ninja Coffee Bar Sparkling And Beautiful

All of these steps might seem like they are going to be time-consuming, but the Ninja Coffee Bar is actually going to do most of the work for you. As long as you regularly sanitize the unit with all of the proper products, it is probably only going to need a few minutes of hands-on cleaning per month. This process is going to protect your coffee maker and greatly improve the taste of your coffee.

How Long Does The Ninja Coffee Bar Take To Clean: Related Questions

Can any type of vinegar be used to clean the Ninja Coffee Bar?

Only white vinegar should be used when cleaning any type of coffee maker. Other types of vinegar could damage the internal components of the device or cause a build-up of mold. Traditional white vinegar is inexpensive and can be found in most supermarkets.

Why does the coffee maker appear to turn off during the cleaning and rinsing cycles?

When the device is going through those cycles, most of the buttons are going to dim, but the maker is still on. Users should avoid touching any buttons until each cycle is fully complete and the “Clean” button is no longer illuminated. Touching any buttons could pause or restart the cycle.

How often should my coffee maker be cleaned if I don’t use it every day?

To keep your Ninja Coffee Bar running smoothly, you should thoroughly clean it at least once every month or two. Even if it isn’t being used regularly, residual moisture could damage some of the internal components or impact the taste of the coffee.

Related Articles: